Design
1. Probe
Tinned copper probe to thread into the conductor lug with the supplied tool
2. External Screen
Moulded conductive EPDM rubber to ensure the connector touchable
3. Insulation
Moulded insulated EPDM rubber to ensure excellent electrical properties
4. Pulling Eye
Provide a detent to position the stainless bail assembly
5. Internal Screen
Moulded conductive EPDM rubber to control electrical stress
6. Voltage Test point
Provide means to check circuit status
7. Earthing Wire
To earth the external screen for the connector
8. Conductor Lug
To connect the cable conductor and probe
Ordering instruction
The ordering formula as followed:
Step 1
Choose the system voltage and current: 25/200
Step 2
Select the range from Table D that fits the diameter over cable insulation
Step 3
Select the conductor code from Table C for the conductor size and type
Step 4
Select the package. 1: 1pc/kit; 3: 3pcs/kit.
Table D
Insulation Range Code | Diameter over cable insulationφ(mm) |
| Min. | Max. |
| A | 16 | 21 |
| B | 18 | 24 |
| C | 22 | 28 |
| D | 25 | 32 |
Table C
Conductor Code
Conductor Cross-section(mm2) | Copper Lug (Hexagonal compression) | Bimetallic Lug (Hexagonal compression) |
| 25 | 01C | 01B |
| 35 | 02C | 02B |
| 50 | 03C | 03B |
| 70 | 04C | 04B |
| 95 | 05C | 05B |
| 120 | 06C | 06B |
Ordering example:
The cable is 25kV, 3-core 95mm2 copper conductor with core insulation diameter of 24mm. Order WAZT 25/200C05C3.
Note:
Sealing or solderless grounding kits shall be ordered separately.
Please add "-X" for cable with copper wire shield without armour, like WAZT 25/200C05C3-X.
Feel free to contact us for detailed information.
