EN
中文 EN Español Deutsch Português Français

WOER(002130):0.000.00(0.00%)

WOER (002130):()

language
中文 EN Español Deutsch Português Français

Identification Products For Wire & Cable

Identification Products For Wire & Cable

PUR

Indentification Tags

Description: The PUR cable markers are made of a thermoplastic polyurethane material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94V-0. For identification of cables and wires, the markers are supplied on rolls for thermal transfer print.

Download the manual

Technical Data

Technical Data Specification Table

Description: The PUR cable markers are made of a thermoplastic polyurethane material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94V-0. For identification of cables and wires, the markers are supplied on rolls for thermal transfer print.

Use: Markers can be easily removed from the carrier, and applied to cables and wire bundles using cable dies. Thermal transfer printer and WO-80500BK ribbon are recommended for meeting printing performance requirements of SAE AS 81531 and MIL-STD-202F.

​

Specification and size

Order CodeColorPack size（pcs/coil）Marker heigh（mm）Marker length（mm）
PUR-M-4H-10-60-1.0K-WWhite10001060
PUR-M-4H-15-75-1.0K-WWhite10001575
PUR-M-4H-25-75-0.5K-WWhite5002575
PUR-M-4H-10-60-1.0K-BLBlack10001060
PUR-M-4H-15-75-1.0K-BLBlack10001575
PUR-M-4H-25-75-0.5K-BLBlack5002575
PUR-M-4H-10-60-1.0K-YYellow10001060
PUR-M-4H-15-75-1.0K-YYellow10001575
PUR-M-4H-25-75-0.5K-YYellow5002575
PUR-M-4H-10-60-1.0K-RRed10001060
PUR-M-4H-15-75-1.0K-RRed10001575
PUR-M-4H-25-75-0.5K-RRed5002575

Physic performance

PropertiesTest MethodTypical value
Hardness​DIN 5350558 Shore D
DensityDIN 534751.27g/cm3
Tensile strengthDIN 5350430MPa
Ultimate elongationDIN 53504400%
Stress at 20% elongationDIN 5350413MPa
Stress at 100% elongationDIN 5350419MPa
Stress at 300% elongationDIN 5350433MPa
Tear StrengthDIN 53515110N/mm
Abrasion LossDIN 5351630 mm3
Compression set at room temperatureDIN EN ISO 81530%
Compression set at 70°CDIN EN ISO 81545%
Notched impact strength (Charpy) +23°CDIN EN ISO 17950 kj/m2
Back

Shenzhen Woer Heat - Shrinkable Material Co., Ltd.
Tel: +86 755 28299160  Email：woer@woer.cn    woer@woer.com

share：