Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harness and electronic assemblies.
Download the manualAdhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harness and electronic assemblies.
Features
● 4:1 shrink ratio allows fewer sizes to cover a wide range of profiles
● Seals and protects against water, moisture and chemical
● Adhesive bonds readily to PVC, XLPE and PP-EPDM cable jackets
● Shrinks rapidly for quick installation
● Continuous operating temperature:-45℃-125℃
● Minimum shrink temperature: 125℃
Property | Test Method | Standard |
Tensile Strength(MPa) | ASTM D2671 | ≥10.4 |
Elongation(%) | ASTM D2671 | ≥200 |
Tensile Strength after aging (MPa) | Ul224 158℃X168hr | ≥7.3 |
Elongation after aging(%) | Ul224 158℃X168hr | ≥100 |
Dieletric strength(kV/mm) | IEC 60243 | ≥15 |
Volume resistivity(Ω.cm) | IEC 60093 | ≥1X1014 |
Dimensions
Code | Size (mm) | Standard Length(mm) | Expanded | Recoverd | ||
Inner Diameter Min(mm) | Inner Diameter Max(mm) | Adhesive Thickness (mm) | Total Wall Thickness(mm) | |||
SBRS-CAPS-1 | 5.75 | 4.00 | 5.75 | 1.27 | 0.56 | 1.70 |
SBRS-CAPS-2 | 7.40 | 5.80 | 7.44 | 1.65 | 0.76 | 2.00 |
SBRS-CAPS-3 | 10.80 | 7.40 | 10.85 | 2.41 | 1.37 | 2.30 |