EN
中文 EN Español Deutsch Português Français

WOER(002130):0.000.00(0.00%)

WOER (002130):()

language
中文 EN Español Deutsch Português Français

Dual Wall Products

Dual Wall Products

SBRS-(2X)QF

Dual Wall Adhesive-Lined Heat Shrink Tubing for Automotive Oil-pipe Protection

SBRS-(2X)QF Adhesive-lined Heat shrink Tubing is specially designed for Automotive Oil-pipe Protection, providing preventive protection to break line, fuel line, hydraulic line and other metal pipeline which is subject to bending or clamping during manufacturing, installation or operation.

Download the manual

Technical Data

Technical Data Specification Table

SBRS-(2X)QF Adhesive-lined Heat shrink Tubing is specially designed for Automotive Oil-pipe Protection, providing preventive protection to break line, fuel line, hydraulic line and other metal pipeline which is subject to bending or clamping during manufacturing, installation or operation.


05 SBRS-(2X)G.png   

Features

● Semi-rigid outer jacket for mechanical damage prevention

● Adhesive inner layer for sealing against moisture and corrosion

● Easy installation

● High strength bonding, the adhesive layer is hard to be peeled off from pipeline

● Continuous operating temperature:-45℃-105℃

● Fully shrink temperature:≥125℃


Technical Data

PropertyTest MethodStandard Performance
Tensile Strength(MPa)ASTM D2671≥12
Elongation(%)ASTM D2671≥300
Longitudinal changeASTM D2671-10%~+10%
Tensile strength after aging(MPa)120℃X24h≥12
Non-deformability

140℃,10min,2kg/cm2

,loaded 5min

≤60%
Low-temperature impactASTM D 746-35℃,no cracking
Impact resistance to fall

Room temperature&-40℃X30min,impacted by a weight of 200g, 0.5m high

no cracking
Stress-crack resistanceASTM D 1693no cracking

Chemical reagents resistance:

0.1mol/L H2SO4,0.1mol/L NaOH,Brake fluid, Engine oil, Gasoline

No abnormal in appearance20℃,120hr

Adhesive

PropertyTest MethodStandard
Water AbsorptionASTM D570＜0.5%
Sofening Point (℃) ASTM E28​105±5
Strength of peeling(PE) ASTM D 1000120N/25mm
Strength of peeling(AL)ASTM D 100080N/25mm

Size Expanded After Recovery Standard Package
mm

Inner  Diameter

Min(mm)

Inner  Diameter

Max(mm)

Total Wall Thickness 

Nom(mm)

Adhesive Thickness

Nom(mm)

 Spool Length M/spool
Φ6.0 6 4.5 1.20±0.20 0.20±0.05 300
Φ8.0 8 6.1 1.30±0.20 0.20±0.05 200
Φ11.0 11 7.1 1.30±0.20 0.20±0.05 200
Φ13.0 13 9.8 1.30±0.20 0.20±0.05 100
Φ15.0 15 11.5 1.30±0.20 0.20±0.05 100
Back

Shenzhen Woer Heat - Shrinkable Material Co., Ltd.
Tel: +86 755 28299160  Email：woer@woer.cn    woer@woer.com

share：