For identification of cables and wires, the markers are supplied on rolls for thermal transfer print.
Download the manualDescriptions :The PUR cable markers are made of a thermoplastic polyurethane material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94-V0. For identification of cables and wires, the markers are supplied on rolls for thermal transfer print.
Markers can be easily removed from the carrier, and applied to cables and wire bundles using cable dies. Thermal transfer printer and WO-80500BK ribbon are recommended for meeting printing performance requirements of SAE AS 81531 and MIL-STD-202F.
Order Code | Color | Pack size(pcs/coil) | Marker high(mm) | Marker length(mm) |
---|---|---|---|---|
PUR-M-4H-10-60-1K-W | White | 1000 | 10 | 60 |
PUR-M-4H-15-75-1K-W | White | 1000 | 15 | 75 |
PUR-M-4H-25-75-0.5K-W | White | 500 | 25 | 75 |
PUR-M-4H-10-60-1K-BL | Black | 1000 | 10 | 60 |
PUR-M-4H-15-75-1K-BL | Black | 1000 | 15 | 75 |
PUR-M-4H-25-75-0.5K-BL | Black | 500 | 25 | 75 |
PUR-M-4H-10-60-1K-Y | Yellow | 1000 | 10 | 60 |
PUR-M-4H-15-75-1K-Y | Yellow | 1000 | 15 | 75 |
PUR-M-4H-25-75-0.5K-Y | Yellow | 500 | 25 | 75 |
PUR-M-4H-10-60-1K-R | Red | 1000 | 10 | 60 |
PUR-M-4H-15-75-1K-R | Red | 1000 | 15 | 75 |
PUR-M-4H-25-75-0.5K-R | Red | 500 | 25 | 75 |
Properties | Test Method | Typical value |
---|---|---|
Hardness | DIN 53505 | 58 Shore D |
Density | DIN 53475 | 1.27g/cm3 |
Tensile strength | DIN 53504 | 30MPa |
Ultimate elongation | DIN 53504 | 400% |
Stress at 20% elongation | DIN 53504 | 13MPa |
Stress at 100% elongation | DIN 53504 | 19MPa |
Stress at 300% elongation | DIN 53504 | 33MPa |
Tear Strength | DIN 53515 | 110N/mm |
Abrasion Loss | DIN 53516 | 30 mm3 |
Compression set at room temperature | DIN EN ISO 815 | 30% |
Compression set at 70°C | DIN EN ISO 815 | 45% |
Notched impact strength (Charpy) +23°C | DIN EN ISO 179 | 50 kj/m2 |