Adhesive lined heat shrink tubing with environmental sealing capability for a wide variety of electrical applications, including automotive and marine wire harness, wire splices, breakouts, and connector-to-cable transitions.
Download the manualSony compliant
Property | Test method | Standard |
---|---|---|
Tensile strength(MPa) | ASTM D 2671 | ≥10.4 |
Elongation(%) | ASTM D 2671 | ≥300 |
Tensile strength after aging(Mpa) | UL224 158℃*168hr | ≥7.3 |
Elongation after aging (%) | UL224 158℃*168hr | ≥200 |
Flammability | ASTM D 2671 B | Self-extinguish within 30s |
Dielectric strength(kV/mm) | IEC 60243 | ≥15 |
Volume resistivity(Ω.cm) | IEC 60093 | ≥1*1014 |
Property | Test method | Standard |
---|---|---|
Water Absorption | ASTM D 570 | <0.5 |
Softening Point(℃) | ASTM E 28 | 90±5 |
Strength of pearing (PE) | ASTM D 1000 | 120N/25mm |
Strength of pearing (Al) | ASTM D 1000 | 80N/25mm |
Size | Expanded | After Recovery | Standard Package | |||
---|---|---|---|---|---|---|
Inch | mm | Internal Diameter(mm) | Internal Diameter (mm) | Total Wall Thickness (mm) | Adhesive Thickness (mm) | Spool Length M/spool |
3/32 | 2.4 | 2.4 | 0.8 | 0.80±0.30 | 0.40±0.20 | 200 |
1/8 | 3.2 | 3.2 | 1.0 | 0.90±0.30 | 0.40±0.20 | 200 |
3/16 | 4.8 | 4.8 | 1.6 | 1.50±0.30 | 0.40±0.00 | 100 |
1/4 | 6.4 | 6.4 | 2.2 | 1.25±0.30 | 0.45±0.20 | 100 |
5/16 | 7.9 | 7.9 | 2.7 | 1.35±0.30 | 0.45±0.20 | 100 |
3/8 | 9.5 | 9.5 | 3.2 | 1.45±0.30 | 0.50±0.20 | 50 |
1/2 | 12.7 | 12.7 | 4.2 | 1.65±0.30 | 0.50±0.20 | 1.22 OR 25M/Roll |
5/8 | 15 | 15 | 5.2 | 1.80±0.30 | 0.55±0.30 | 1.22 OR 25M/Roll |
3/4 | 19.1 | 19.1 | 6.3 | 1.95±0.30 | 0.60±0.30 | 1.22 OR 25M/Roll |
1 | 25.4 | 25.4 | 8.5 | 2.00±0.40 | 0.60±0.30 | 1.22 OR 25M/Roll |
1-1/4 | 30 | 30 | 10.2 | 2.15±0.40 | 0.65±0.30 | 1.22 OR 25M/Roll |
1-1/2 | 39 | 39 | 13.5 | 2.45±0.40 | 0.75±0.30 | 1.22 OR 25M/Roll |
2 | 50 | 50 | 17 | 2.75±0.40 | 0.80±0.30 | 1.22 OR 25M/Roll |