Your Location:Home > PRODUCTS > Separable Connectors

200A Loadbreak Insulated Cap

200A Loadbreak Insulated Cap

Description:                                                                                                                       Detailed Specification Download   

  • Made of high quality EPDM rubber
  • Used to insulate, shield and seal the loadbreak interface of 200A bushings
  • In compliance with IEEE 386
  • 100% factory tested  

Technical Data

Item WAJM 15/200
Rated Voltage (U0/U) 8.3/14.4kV
Rated Current 200A
AC Withstand Voltage 34kV for 1min
Partial Discharge 11kV,≤ 3pC
Impulse Withstand Voltage (10 times for each polarity) 95kV
Screen Resistance ≤5000Ω


200A Loadbreak Elbow Connector with Surge Arrester

  • Fully screened and insulated
  • Protecting electrical components against over-voltage and transients
  • The surge arrester’s active part is made of metal oxide
  • The connected braid to manage short circuit currents
  • In compliance with IEC 60099.4-2006, JB/T 8952
  • 100% factory tested
  • Made of high quality EPDM


Technical Data

Item WAZT-BLQ-17/45 WAZT-BLQ-17/50
SystemNominalVoltage(kV) 15 15
RatedVoltage 17 17
ContinuousOperationVoltage (kV) 13.6 13.6
DC(1mA) ReferenceVoltage(kV) ≥24 ≥25
SteepCurrentImpulseResidualVoltage (kV) ≤51.8 ≤57.5
LightningImpulseResidualVoltage(kV) ≤ 45 ≤ 50
SwitchingImpulseResidualVoltage(kV) ≤35 ≤42.5
LongDurationCurrentImpulseWithstand(A) 150 100
HighCurrentImpulseWithstand (kA) 65 65

Related Products


The Adobe Acrobat PDF reader is required to view and read these documents. To obtain the free reader directly from Adobe, click here and follow the installation instructions.

Woer mansion,North Lanjing Rd,Pingshan,Shenzhen P.R.CHINA,      Tel: +86-755-28299123     Fax:+86-755-28299160