WOER(002130):0.000.00(0.00%)

SBRS-(3X)GLW

Flexible, Thick Adhesive-Lined Dual Wall Heat-Shrink Tubing

Flexible, Thick Adhesive-Lined Dual Wall Heat-Shrink Tubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive.

Features and Benefits

  • Low longitudinal shrinkage
  • Thick adhesive liner bonding to a wide variety of plastics, rubber and metals forms an effective barrier against fluids and moisture,
  • Flexible
  • Continuous operating temperature:-45℃-125℃
  • Min Shrink Temperature:105℃
  • Shrink ratio: 3:1

Technical Data

PropertyTest methodStandard Typical Performance
Tensile strength(Mpa)ASTM D 2671≥ 10.411
Elongation(%)ASTM D 2671≥ 300450
Tensile strength after aging(Mpa)UL224 158 ℃*168hr≥ 7.38.5
Elongation after aging (%)UL224 158 ℃*168hr≥ 200350
Dielectric strength(kV/mm)IEC 60243≥ 1517.5
Volume resistivity( Ω.cm)IEC 60093≥ 1*10142.5 *1014

Adhesive

PropertyTest methodStandard Performance
Water AbsorptionASTM D 570< 0.2%
Softening Point( ℃)ASTM E 2895
Strength of pearing (PE)ASTM D 1000120N/25mm
Strength of pearing (PE)ASTM D 100080N/25mm



Dimensions

SizeExpandedAfter RecoveryStandard Package
InchmmInternal Diameter  (mm)Internal Diameter  (mm)Total Wall Thickness  (mm)Adhesive Thickness  (mm)Spool Length M/spool
1/ 83.23.21.00.90±0.300.45±0.20200 l
3/164.84.81.61.20±0.300.55±0.20100
1/ 46.46.42.21.25±0.300.55±0.20100
5/167.97.92.71.35±0.300.65±0.20100
3 /89.59.53.21.35±0.300.65±0.2050
1 /212.712.74.21.55±0.400.75±0.201.22 OR 25M/Roll
5 /815.015.05.21.65±0.400.75±0.201.22 OR 25M/Roll
3 /419.119.16.31.90±0.400.85±0.201.22 OR 25M/Roll
125.425.48.52.00±0.400.90±0.201.22 OR 25M/Roll
1-1/430.030.010.22.05±0.400.90±0.201.22 OR 25M/Roll
1-1/238.138.113.52.35±0.401.05±0.201.22 OR 25M/Roll



​  ​ ​


Back